Tripp Lite In-Row Precision Cooling System – 12 kW (41,000 BTU/hr), 208-240V, 42U, 300mm – Indoor In-row Air Conditioning Unit for Server Rooms 12 KW 41 000 BTU 208-240V 42U

Tripp Lite In-Row Precision Cooling System – 12 kW (41,000 BTU/hr), 208-240V, 42U, 300mm – Indoor In-row Air Conditioning Unit for Server Rooms 12 KW 41 000 BTU 208-240V 42U
Slim Air Conditioning System Saves Space While Delivering Primary Precision CoolingThis SmartRack® in-row precision air conditioning system is the ideal cooling option for your small-to-medium data center, IT room or other edge location. Typical CRAC/CRHC units are too large for these locations, but the SRCOOLDXRW12 cools your mission-critical equipment while occupying very little floor space, supporting up to 12.8kW (43,686 BTU/hr) of heat load per unit. The cabinet is just 300 millimeters wide, making it easy to position optimally within a row for precision close-coupled cooling. It requires the same front and rear clearance as a standard rack enclosure. Uses DX Technology to Deliver Cool Air to LoadsThis direct expansion (DX) cooling system pulls unconditioned air through the rear of the unit, cools it with condensed refrigerant and delivers it to equipment loads with up to 43,686 BTU/hour and more than 1,475 CFM airflow. EC fans and a variable speed compressor provide variable airflow and constant temperature based on room conditions. High Cooling Efficiency Saves You MoneyInverter compressor and EC fan technology automatically regulate cooling output to match heat load and conserve energy during off-peak hours, lowering your overall energy costs and lengthening the lifespan of the equipment being cooled. The close-coupled design captures heat at the source to improve energy efficiency by 25% over traditional perimeter CRACs. In addition, the SRCOOLDXRW12 is ideally sized for your small-to-medium data center at virtually any density, saving you the cost of a raised floor or an overbuilt/overprovisioned CRAC unit. It uses eco-friendly R410A refrigerant, reflecting your commitment to environmental responsibility. Easy to Operate with the Color TouchscreenYou have total control over the SRCOOLDXRW12 using the front-panel color touchscreen interface, which lets you monitor and access system configuration and status information. A built-in controller detects and manages data center temperatures, automatically adjusts cooling levels and supports various control modes. Intelligent temperature control and variable speed technology allow precise airflow and temperature adjustment to match specific load requirements closely without wasting energy on overcooling. Reconfigure Your Cooling Needs as Your Equipment Needs ChangeThe modular, in-row cabinet design easily facilitates expansion or movement on its built-in casters, allowing your increasing cooling needs to be reconfigured as your data center grows. A simple redundancy model (N+1) is built in as part of the number of scalable units to be deployed. Pre-Installed WEBCARDLXMINI Network Interface Offers 24/7 AccessRemote access to the SRCOOLDXRW12 can save you the time and expense of having someone constantly on-site. The built-in WEBCARDLXMINI lets you manage temperatures, receive alerts, review logs and control settings 24/7 via HTTP(S), menu/CLI via SSH/Telnet and SNMP for integration with management software platforms such as DCIM. The ability to configure settings and monitor alarms off-site can bolster your bottom line.

Tripp%20Lite SRCOOLDXRW12

Features

Cools mission-critical equipment with up to 12.8 kW (43,686 BTU/hr) of high-precision in-row cooling power

Slim 300 mm profile allows maximum cooling while taking up little space

Close-coupled design improves energy efficiency by 25% over traditional CRACs

User-friendly color touchscreen allows complete access to data and status information

Configurable side and/or front airflow discharge and maintenance mode capability

1-year limited warranty

Guides & Documents

Brochure

Manual