Tripp Lite HDMI Over Cat6 Active Remote Receiver Video Audio PoC 4K @ 60Hz – 2 Output Device – 125 ft Range – 1 x Network (RJ-45) – 2 x HDMI Out – 4K – 3840 x 2160 – Twisted Pair – Category 6 – TAA Compliant RECEIVER VIDEO AUDIO POC 4K 60HZ

Tripp Lite HDMI Over Cat6 Active Remote Receiver Video Audio PoC 4K @ 60Hz – 2 Output Device – 125 ft Range – 1 x Network (RJ-45) – 2 x HDMI Out – 4K – 3840 x 2160 – Twisted Pair – Category 6 – TAA Compliant RECEIVER VIDEO AUDIO POC 4K 60HZ
Works with Tripp Lite B127-Series transmitters to extend 4K audio/video via Cat6 cable to 2 HDMI displays up to 125 ft. away.Features 2-Port Receiver Extends HDMI Signals for 4K Digital Signage or Video Presentations This box-style active remote receiver works in tandem with Tripp Lite’s B127-002-H or B127-004-H transmitter to extend 4K video (at 60 Hz) and 7.1 audio from an HDMI source to two HDMI displays up to 125 feet using Cat6 cabling. It can also extend a 4K HDMI signal (at 30 Hz) up to 150 feet and a 1080p HDMI signal (at 60 Hz) up to 200 feet.An Ideal Setup for Settings Where Conventional HDMI Cables Can’t Reach The B127-200-H is recommended for home theaters and video presentations in conference rooms, schools, trade shows, meeting facilities, houses of worship, retail settings and other digital signage applications where the source and display are farther apart than conventional A/V cables allow.Built-In PoC Technology Provides Power to Avoid Bulky External Power Bricks Built-in Power over Cable (PoC) technology powers the low-profile receiver over Cat6 cable. Green and orange LEDs will light up to indicate the unit is receiving power and a signal is being received. PoC lets you avoid the hassle of a bulky power brick and gives you the freedom to place the receiver away from an AC outlet.Supports Crystal-Clear 4K HDMI Video with Multi-Channel Audio and 4:4:4 Color The B127-200-H supports Ultra HD video resolutions up to 3840 x 2160 (4K x 2K) at 60 Hz with full, rich uncompressed DTS-HD, Dolby TrueHD and 7.1-channel digital audio. Built-in equalization automatically fine-tunes the image quality at the remote displays with no time-consuming manual fiddling needed. The receiver is compatible with HDMI 2.0 standards for carrying HDR signals, which provide a wide range of vibrant colors with richer contrast, brighter whites and deeper blacks. HDCP 2.2 compliance allows you to stream iTunes and Netflix content with no complications. The B127-200-H also supports 4:4:4 chroma subsampling for top-level PC gaming or using your HDTV as a PC monitor.Plug-and-Play Operation for Quick Setup and Immediate Use The receiver works right out of the box with no software required. Mounting hardware is included for installing it on a wall, pole or 19-inch rack. Connect the receiver to the display with a user-supplied highspeed HDMI cable (such as Tripp Lite’s P568- or P569-Series) and to the transmitter with Cat6 Ethernet cable (such as Tripp Lite N202-Series cable).TAA-Compliant for GSA Schedule Purchases The B127-200-H is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.

Tripp%20Lite B127-200-H

Features

Requires Tripp Lite B127-002-H or B127-004-H transmitter to extend HDMI signals

Supports UHD resolutions up to 3840 x 2160 @ 60 Hz (4:4:4) for crystal-clear 4K video

Power over Cable (PoC) technology provides power to the receiver via Cat6 cable

Supports High Dynamic Range (HDR) for richer contrast and expanded color accuracy

Plug-and-play operation with no software required for easy, immediate installation

Guides & Documents

Brochure

Manual