Tripp Lite UPS Smart Online 3000VA 2700W 208/230V LCD USB DB9 WEBCARDLX 2U – 2U Rack-mountable – 3 Hour Recharge – 5 Minute Stand-by – 230 V AC Input – 200 V AC, 208 V AC, 220 V AC, 230 V AC, 240 V AC Output – 8 x IEC 60320 C13, 2 x IEC 60320 C19 208/230V ONLINE 10OUT C13 WEBCARDLX

Tripp Lite UPS Smart Online 3000VA 2700W 208/230V LCD USB DB9 WEBCARDLX 2U – 2U Rack-mountable – 3 Hour Recharge – 5 Minute Stand-by – 230 V AC Input – 200 V AC, 208 V AC, 220 V AC, 230 V AC, 240 V AC Output – 8 x IEC 60320 C13, 2 x IEC 60320 C19 208/230V ONLINE 10OUT C13 WEBCARDLX

VPN: SUINT3000LCD2UN UPC: 37332253583 SKU: 7TU191
0 sold

$3,774.66

DOUBLE-CONVERSION UPS 3000VA RT 208/230V ONLINE 10OUT C13 WEBCARDLX

$3,774.66

Add to cart
Buy Now
Controls/Indicators
Status Indicators

    4 Front Panel LEDs:

    • AC input (Green)
    • AC output (Green)
    • Battery (Yellow)
    • Fault (Red)

    Front Panel LCD Display:

    • Interactive Front-panel LCD Interface Reports UPS Operating Mode
    • Detailed UPS Status And Site-power Information
    • LCD Interface Also Enables A Variety Of Advanced UPS Setup And Configuration Options
Environmental Conditions
Maximum Operating Temperature104°F (40°C)
Interfaces/Ports
Serial PortYes
EPO PortYes
USB (HID Compliant) PortYes
Miscellaneous
Package Contents
  • SmartOnline SUINT3000LCD2UN 3000VA Rack-mountable UPS
  • WEBCARDLX Network Interface Card
  • USB Cable
  • RS-232 Cable
  • EPO Cable
  • C19-to-C20 Power Cable
  • 2 x C13-to-C14 Power Cables
  • 4-post Rack-mounting Hardware
  • Owner's Manual
Country of OriginChina
Environmentally FriendlyYes
Environmental CertificationRoHS
Energy StarYes
Battery Information
Hot SwappableYes
Backup/Run Time (Half Load)13.50 Minute
Backup/Run Time (Full Load)5 Minute
Replaceable BatteryYes
DC System Voltage72 V DC
Typical Battery Recharge Time3 Hour
Physical Characteristics
Weight (Approximate)68.72 lb
Form FactorRack-mountable
Rack Height2U
Height3.5"
Width17.2"
Depth24.3"
Power Description
Input Voltage230 V AC
230 V AC
Output Voltage230 V AC
208 V AC
200 V AC
240 V AC
230 V AC
220 V AC
208 V AC
200 V AC
220 V AC
240 V AC
Surge Energy Rating570 J
Waveform TypePure Sine Wave
Output Frequency60 Hz
60 Hz
Management
Network ManagementSNMP/HTTP Remote Monitoring
AlarmOverload
UPS StartUp
UPS Fault
Remote Shutdown
Low Battery
Power Failure
General Information
Product TypeDouble Conversion Online UPS
Manufacturer Part NumberSUINT3000LCD2UN
Manufacturer Website Addresshttp://www.tripplite.com
ManufacturerTripp Lite by Eaton
Product ModelSUINT3000LCD2UN
Product NameSmartOnline SUINT3000LCD2UN 3000VA Rack-mountable UPS
Product LineSmartOnline
Brand NameTripp Lite
Technical Information
Application/UsageComputer Room
Server
Network Closet
Mission Critical Equipment
Data Center
Dataline ProtectionRJ-45
RJ-11
Overload ProtectionYes
Plug/Connector TypeIEC 60320 C20
PhaseSingle Phase
Receptacle TypeIEC 60320 C19
IEC 60320 C13
EMI/RFI Noise FilterYes
Energy SavingGreen Energy-Saving
Transfer Time0 ns
Receptacle Detail2 x IEC 60320 C19
8 x IEC 60320 C13

Tripp Lite UPS Smart Online 3000VA 2700W 208/230V LCD USB DB9 WEBCARDLX 2U – 2U Rack-mountable – 3 Hour Recharge – 5 Minute Stand-by – 230 V AC Input – 200 V AC, 208 V AC, 220 V AC, 230 V AC, 240 V AC Output – 8 x IEC 60320 C13, 2 x IEC 60320 C19 208/230V ONLINE 10OUT C13 WEBCARDLX
Double-Conversion UPS Protects Equipment against Damage, Downtime and Data Loss This 200/208/220/230/240V 50/60 Hz UPS system maintains perfect output by converting AC input to DC, then reconverting UPS output to fully regulated sine wave AC with +/-2% voltage regulation in online and battery modes. Featuring a 2.7kW capacity, high 0.9 power factor, 570 joules of surge suppression, true on-line operation with pure sine wave output and zero transfer time to battery mode in on-line double-conversion mode, the SmartOnline® SUINT3000LCD2UN double-conversion UPS provides the highest level of AC power protection and battery backup for critical network closet, computer room and data center equipment. Set Power Strategies to Reflect Your Protection Priorities Pick your power strategy, from precise power for sensitive systems to the highest possible electrical efficiency, while ensuring 100% uptime. Choose from five selectable strategies: Max Efficiency, Max Quality, Frequency Regulation, Frequency Conversion and Auto Adaptive, which automatically offers increased efficiency when power conditions are good and enhanced power quality when power conditions are poor. Individually Controllable Load Banks Let You Access and Control Outlets Remotely Six C13 and two C19 outlets are split into two switchable load banks, allowing you to reboot select components or shed loads remotely. In addition to those eight outlets, this UPS provides two more C13 outlets in their own unswitched bank for powering critical components. Reliable, Expandable Battery Backup Keeps You Operational Through Power Outages The field-replaceable, hot-swappable internal battery (RBC72S) provides 13.5 minutes of support at half load (1350W) and five minutes at full load (2700W), keeping protected equipment operational through power failures. For mission-critical applications demanding scalable extended runtime, the UPS supports “smart” external battery packs, such as Tripp Lite’s BP726V18-2US (sold separately). Both the internal and external batteries are automatically sensed and configured during replacement to offer accurate runtime-remaining and battery age notifications during outages. The intelligent battery management system with temperature-compensated charging extends battery life. Automatic Bypass Maintains Utility Output During Fault Conditions Auto-bypass mode keeps connected equipment powered and operational, even during UPS fault conditions. ENERGY STAR-Certified Economy Mode Helps You Save Money and Protect the Environment By meeting strict EPA efficiency guidelines, this ENERGY STAR-certified UPS system helps you save money and energy. A power-saving Economy mode setting option offers enhanced efficiency and reduced BTU output when utility power is already high quality. Automatically Turns Back On After Power Is Restored Battery-independent restart ensures automatic UPS power-up without user interaction after lengthy power outages, even when batteries are expired and require replacement. Intuitive Front-Panel Interface for Convenient UPS Operation and Monitoring The front-panel LCD screen reports UPS operating mode, detailed UPS status and site-power information, as well as a variety of advanced UPS setup and configuration options. LEDs indicate AC input/output, battery and fault status. Advanced Communications Ports Allow for Automatic Saves and Shutdowns RS-232 and HID-compliant USB ports connect to a computer running Tripp Lite’s free downloadable PowerAlert® software to enable safe unattended file saves and system shutdown in case of a prolonged power failure.

Tripp%20Lite SUINT3000LCD2UN

Features

Offers network-grade protection against power failures and voltage fluctuations

Zero transfer time between on-line and battery modes for uninterrupted operation

Optional external battery packs provide additional runtime for applications requiring it

Included WEBCARDLX network interface allows you 24/7 remote access from anywhere

ENERGY STAR-certified to save electricity, lower costs, and protect the environment

2-year limited warranty

$250,000 Ultimate Lifetime Insurance

Guides & Documents

Brochure

Refer & win exciting rewards

Create an account to get your referral code. Share your referral code with others. You will get exciting discount coupon codes each time someone orders using your referral code

Get Rewards Now
X