Tripp Lite 60kVA Smart Online 3-Phase UPS 400/230V Medium Frame 3 Batteries – 3.50 Minute Full Load – 7.50 Minute Half Load – 60 kVA / 60 kW – SNMP ManageableHardwired – Input Voltage: 230 V AC, 380 V AC, 400 V AC, 415 V AC – Output Voltage: 220 V AC, 230 V AC, 240 V AC, 380 V AC, 400 V AC, 415 V AC – Tower 400/230V MEDIUM FRAME 5 BATTERIES

Tripp Lite 60kVA Smart Online 3-Phase UPS 400/230V Medium Frame 3 Batteries – 3.50 Minute Full Load – 7.50 Minute Half Load – 60 kVA / 60 kW – SNMP ManageableHardwired – Input Voltage: 230 V AC, 380 V AC, 400 V AC, 415 V AC – Output Voltage: 220 V AC, 230 V AC, 240 V AC, 380 V AC, 400 V AC, 415 V AC – Tower 400/230V MEDIUM FRAME 5 BATTERIES
Tripp Lite’s SVX60KM2P3B 60kVA/60kW SmartOnline® Medium-Frame UPS includes installed input, bypass and output breakers, a static transfer switch (STS) and 2 included 30kVA SVX30PM power modules. This system supports the addition of up to 2 additional user-installable SVX30PM power modules to accommodate increased capacity up to 90kW with N+1 fault-tolerance. Three internal battery modules are included, with space for 2 additional SVXBM internal battery modules or support for any number of compatible ±240VDC external battery packs (sold separately). Featuring a modular, scalable design with high-efficiency voltage and frequency independent/VFI operation, Tripp Lite’s SVX Series SmartOnline UPS systems are ideal for the protection of a wide variety of critical IT systems. Scalable, modular configuration enables UPS capacity upgrades and hot-swap power supply maintenance without costly downtime. Over 95% efficient in standard online mode and over 99% efficient in optional economy mode enables reduced operating and cooling costs. Unity power factor configuration provides equal kVA and kW output ratings for up to 25% more wattage capacity than common 0.8 – 0.9 power factor competing designs. Network-grade sine-wave AC output with 1% output voltage regulation and than 1.5% output total harmonic distortion. Advanced IGBT inverter with Digital Signal Processor (DSP) technology provides for than 3% input total harmonic distortion (THDi) to support 1:1 generator sizing. Dual-input hardwire design enables operation from one or two input power sources for enhanced system availability. N+1 fault-tolerance is configurable anytime there is an “extra” SVX30PM 30kW power module installed beyond the minimum required quantity. Automatic and manual bypass options keep connected equipment operational during routine maintenance or critical power module failure.

Tripp%20Lite SVX60KM2P3B

Features

Tripp Lite’s SVX60KM2P3B 60kVA/60kW SmartOnline UPS offers network-grade power protection in a highly configurable medium-chassis modular, scalable form factor

Includes 2 SVX30PM 30kW power modules for 60kW total capacity; Open slots for up to 2 additional SVX30PM 30kW power modules enable scalable capacity configurations up to 90kW with enhanced N+1 redundancy

Included batteries support a full load of 60kW for 3.5 minutes and half load of 30kW for 7.5 minutes; Extended runtime is available with the addition of up to two SVXBM internal battery modules or any number of supported external battery packs (sold separately)

Supports 220/380, 230/400 or 240/415V AC, 3-Phase Wye 4-Wire plus Earth Hardwire input and output wiring

Tested to CE for worldwide applications

Pre-installed WEBCARDLX network interface

Serial port enables unattended shutdown and UPS monitoring ability

Modular configuration with hot-swappable power modules enables easy and fast maintenance with zero downtime

Wide input voltage operating range enables full continuous online operation during brownouts as low as 120V (Ph-N) and overvoltages up to 276 (Ph-N)

Narrow output voltage operating range regulates output voltage within 1% of the selected 220/230/240 nominal output voltage in online, double-conversion mode

Guides & Documents

Brochure

Manual