Tripp Lite Component Video RCA Over IP Extender Transmitter Over Cat5/Cat6 – 1 Output Device – 328.08 ft Range – 1 x Network (RJ-45) – 1 x HDMI Out – WUXGA – 1920 x 1200 – Twisted Pair – Category 6 – Rack-mountable – TAA Compliant TRANSMITTER OVER CAT5 / CAT6
The B160-001-CSI Component Video (RCA) over IP Extender Transmitter works with a Tripp Lite B160-Series receiver (sold separately) to extend and distribute component video, stereo audio, RS-232 serial and IR (infrared) remote signals from the source to the display located up to 328 feet (100 meters) away, which is more than 200 feet farther than a traditional Cat5e/6 solution. By adding a chain of low-cost unmanaged network switches, such as Tripp Lite’s NG5, you can continue extending the distance between source and display up to 328 feet per switch. The B160-001-CSI displays a single source on a single display or distributes a single signal to multiple displays. Create a multi-in, multi-out installation with up to 64 transmitters and 255 receivers* by connecting dedicated managed Ethernet network switches with Internet Group Management Protocol (IGMP), such as Tripp Lite’s NSS-G16D2.With a compatible B160-Series receiver, you can send the component video and stereo audio to any analog or digital display, including DisplayPort, HDMI and VGA, allowing you to mix and match technologies and use existing monitors. An IGMP-enabled switch will let you manage all connections for centralized control over which sources show on which displays.The B160-001-CSI supports video resolutions up to 1080i. It mounts to a wall, rack or pole using the included hardware. An HDMI output port allows connection of a local display.
Tripp%20Lite B160-001-CSI
Guides & Documents
Brochure
Manual