Tripp Lite DVI Over Cat5/Cat6 Passive Video Extender Remote Video Receiver 100′ – 1 Input Device – 1 Output Device – 100 ft Range – 1 x Network (RJ-45) – 1 x DVI Out – Full HD – 1920 x 1080 – Twisted Pair – Category 6 – TAA Compliant REMOTE UNIT TAA/GSA

Tripp Lite DVI Over Cat5/Cat6 Passive Video Extender Remote Video Receiver 100′ – 1 Input Device – 1 Output Device – 100 ft Range – 1 x Network (RJ-45) – 1 x DVI Out – Full HD – 1920 x 1080 – Twisted Pair – Category 6 – TAA Compliant REMOTE UNIT TAA/GSA

VPN: B140-1P0 UPC: 37332156655 SKU: DP8653

$34.00

DVI OVER CAT5 PASSIVE EXTENDER REMOTE UNIT TAA/GSA

Share:

Media & Performance
Twisted Pair Cable StandardCategory 6
Media Type SupportedTwisted Pair
Video
Graphics ModesFull HD
Maximum Video Resolution1920 x 1080
Interfaces/Ports
Number of Network (RJ-45) Ports1
Network (RJ-45)Yes
Number of DVI Outputs1
DVI OutYes
Miscellaneous
Package Contents
  • B140-1P0 DVI Over Cat5 Passive Extender Remote Unit
  • Owner's Manual
Certifications & StandardsTAA
Country of OriginTaiwan
Environmentally FriendlyYes
Environmental CertificationRoHS
TAA CompliantYes
Technical Information
Connectivity TechnologyWired
Maximum Operating Distance100 ft
Number of Output Devices Supported1
Number of Input Devices Supported1
General Information
Product TypeVideo Extender Receiver
Manufacturer Part NumberB140-1P0
Manufacturer Website Addresshttp://www.tripplite.com
ManufacturerTripp Lite by Eaton
Product ModelB140-1P0
Product NameDVI Over Cat5 Passive Extender Remote Unit
Brand NameTripp Lite

Tripp Lite DVI Over Cat5/Cat6 Passive Video Extender Remote Video Receiver 100′ – 1 Input Device – 1 Output Device – 100 ft Range – 1 x Network (RJ-45) – 1 x DVI Out – Full HD – 1920 x 1080 – Twisted Pair – Category 6 – TAA Compliant REMOTE UNIT TAA/GSA
The B140-1P0 is a receiver unit that is used with the B140-002 and B140-004 extender/splitter transmitter units, and it transmits a DVI-D Single-Link signal up to 100 ft. away using a single Cat5e/6 patch cable. To achieve maximum distance and resolution, use 24AWG Solid Wire Cat5e/6 cable (Tripp Lite’s N202-Series). The B140-1P0 is compatible with all operating systems, and is plug and play, with no external power, software or drivers required. Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases. Installation is simple. Connect a B140-002 or B140-004 transmitter (not included) to a DVI source using a Tripp Lite P561-Series DVI cable (not included). Connect the B140-1P0’s built-in DVI connector to a display. Finally, the receiver unit is connected to an RJ45 port on the transmitter unit using a single Cat5e/6 cable. A 1920 x 1080 @ 60Hz signal can be extended up to 50 ft. from the source,, or a 1024 x 768 @ 60Hz signal up to 100 ft..

Tripp%20Lite B140-1P0

Features

For use with B140-002 or B140-004 extender/splitter transmitter units

Supports DVI-D Single-Link video resolutions up to 1920 x 1080 @ 60Hz

Extends a 1920 x 1080 @ 60Hz signal up to 50 ft., or a 1024 x 768 @ 60Hz signal up to 100 ft.

Use 24AWG, Solid Wire Cat5e/6 cable, such as Tripp Lite’s N202-Series, to achieve maximum distance and resolution

Compatible with all operating systems

Plug and play, no external power, software or drivers required

Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases

Guides & Documents

Brochure

X