Tripp Lite HDBaseT HDMI Over Cat5e Cat6 Cat6a 4×2 Extender Transmitter, Serial and IR Control 4K x 2K 150m 500ft – 4 Input Device – 500 ft Range – 2 x Network (RJ-45) – 4 x HDMI In – Serial Port – 4K – 3840 x 2160 – Twisted Pair – Category 6a – Wall Mountable, Rack-mountable, Pole-mountable” EXTENDER 4X2 TRANSMITTER SERIAL/IR
The BHDBT-T-SI-4X2 HDBaseT HDMI over Cat5e/6/6a 4×2 Extender Matrix Transmitter works in tandem with the Tripp Lite BHDBT-Series receiver in your HDBaseT installation to extend uncompressed HDMI video and audio, RS-232 serial and IR remote control signals. It features four HDMI input ports and two RJ45 output ports, letting you route any source to either display or the same source to both displays.Using a single Cat5e/6/6a cable, the BHDBT-T-SI-4X2 can extend an Ultra High Definition(UHD) 3840 x 2160(4K x 2K) signal up to 328 feet(100 m) or an HD 1920 x 1080(1080p) signal up to 500 feet(150 m). To further extend and expand your installation, you can insert up to five BHDBT-Series Extender Transceivers between the transmitter and receiver for a total range up to 3,000 feet with a monitor connected to each transceiver.** The sources connect to locking HDMI ports that prevent the cable from coming loose or undone, ensuring an intact signal.The BHDBT-T-SI-4X2 supports 7.1-channel surround sound, DTS-HD and Dolby TrueHD audio, as well as 3D video, EDID and HDCP. Included mounting hardware lets you attach the unit to a wall, rack or pole. Sets up quickly with no software to download or install.
Tripp%20Lite BHDBT-T-SI-4X2
Features
Features 4 HDMI input ports and 2 RJ45 output ports
Supports video resolutions up to 3840 x 2160 (4K x 2K)
Supports 7.1-channel surround sound, DTS-HD and Dolby TrueHD
Mounts easily to wall, rack or pole
Plug and play-no software or drivers to install
Guides & Documents
Brochure
Manual