Tripp Lite UPS Smart 1000VA 800W Rackmount AVR 120V Pure Sine Wave USB DB9 SNMP 2URM – 1000VA/800W – 5.3 Minute Full Load – 6 x NEMA 5-15R 6OUT 2URM LCD USB DB9 10FT CORD

Tripp Lite UPS Smart 1000VA 800W Rackmount AVR 120V Pure Sine Wave USB DB9 SNMP 2URM – 1000VA/800W – 5.3 Minute Full Load – 6 x NEMA 5-15R 6OUT 2URM LCD USB DB9 10FT CORD

VPN: SMART1000RM2U UPC: 37332118806 SKU: C96283

$1,044.58

UPS SMART 1000VA 800WAVR 120V 6OUT 2URM LCD USB DB9 10FT CORD

Share:

Environmental Conditions
Maximum Operating Temperature104°F (40°C)
Interfaces/Ports
USBYes
Total Number of Expansion Slots1
Management
Network ManagementSNMP Manageable
AlarmLow Battery
On Battery
Overload
Miscellaneous
Package Contents
  • SMART1000RM2U UPS System
  • PowerAlert Software CD
  • Serial & EPO Cabling
  • 4 x Post Rackmount Installation Kit
  • Instruction Manual
Software IncludedPowerAlert Software
Certifications & StandardsUL1778 (USA), cUL (Canada), FCC Class B (emissions), NOM (Mexico), Conforms to IEEE 587 / ANSI C62.41 specifications
Country of OriginChina
Battery Information
Battery ChemistryLead Acid
Hot SwappableYes
Backup/Run Time (Half Load)15 Minute
Backup/Run Time (Full Load)5.30 Minute
Typical Battery Recharge Time4 Hour
Physical Characteristics
Weight (Approximate)35.40 lb
Rack Height2U
Height3.5"
Width17.5"
Depth12.5"
Power Description
Input Voltage120 V AC
120 V AC
Output Voltage120 V AC
120 V AC
Waveform TypeSine Wave
Technical Information
Emergency Power OFFYes
Plug/Connector TypeNEMA 5-15P
Cord Length10 ft
Receptacle TypeNEMA 5-15R
Receptacle Detail6 x NEMA 5-15R
General Information
Product TypeLine-interactive UPS
Manufacturer Part NumberSMART1000RM2U
Manufacturer Website Addresshttp://www.tripplite.com
ManufacturerTripp Lite by Eaton
Product NameSMART1000RM2U UPS System
Product LineSmartPro
Brand NameTripp Lite

Tripp Lite UPS Smart 1000VA 800W Rackmount AVR 120V Pure Sine Wave USB DB9 SNMP 2URM – 1000VA/800W – 5.3 Minute Full Load – 6 x NEMA 5-15R 6OUT 2URM LCD USB DB9 10FT CORD
Protects Mission-Critical Rack-Mounted Equipment Provides fully regulated sine wave AC output for servers, network storage devices and telecom hardware Audible alarm signals loss of utility power, overload, low battery and fault conditions 6 NEMA 5-15R outlets 10-ft. (3.05 m) power cord with 120V NEMA 5-15P input 570-joule surge suppression rating Reliable Battery Backup Supports half load up to 15 min. and full load up to 5.3 min. Internal batteries designed for hot-swap field replacement 95% line-power efficiency rating saves money in energy costs Switchable Outlets 2 load banks, each with 2 outlets controllable remotely to reboot equipment or shed nonessential loads Automatic Voltage Regulation (AVR) Maintains 120V nominal output over input range of 83V-147V without using battery power EMI/RFI Line Noise Filtering Removes electromagnetic and radio frequency interference that can disrupt or damage equipment’s performance Interactive LCD Screen Front-panel LCD signals operating mode, load level, voltage, battery charge and estimated runtimes Rotates for easy viewing in rack-mount or tower configurations Network Management Cards Compatible with Tripp Lite UPS management card options TLNETCARD, WEBCARDLX and SNMPWEBCARD Communications Ports USB and DB9 ports combine with PowerAlert software, available via free download, to monitor operating conditions, monitor AC power, and enable safe unattended system shutdown and file saves in case of a prolonged power failure EPO port supports emergency shutdown in large facilities Versatile Installation Options Hardware included for 4-post mounting in 2U of EIA-standard 19 in. rack Mounts on wall or 2-post rack with optional 2POSTRMKITWM accessory

Tripp%20Lite SMART1000RM2U

Features

Corrects under- and overvoltages from 83V to 147V

6 NEMA 5-15R outlets-4 switchable via network interface

Network power management and control capability

Interactive LCD monitoring screen

15 min. runtime at half load; 5.3 min. at full load

Guides & Documents

Brochure

Manual

X