Tripp Lite UPS Smart 1050VA – 1000VA 650W Tower AVR 120V Pure Sine Wave USB DB9 SNMP – 1050VA/650W – 7 Minute Full Load – 8 x NEMA 5-15R 8OUT TOWER USB DB9 TEL/DSL SNMP

recently added items

x

Tripp Lite UPS Smart 1050VA – 1000VA 650W Tower AVR 120V Pure Sine Wave USB DB9 SNMP – 1050VA/650W – 7 Minute Full Load – 8 x NEMA 5-15R 8OUT TOWER USB DB9 TEL/DSL SNMP

VPN: SMART1050SLT UPC: 37332119902 SKU: C96281

$870.48

UPS SMART 1050VA 650WAVR 120V 8OUT TOWER USB DB9 TEL/DSL SNMP

SKU: e44405ec4d0b Categories: , ,

Share:

Controls/Indicators
Status IndicatorsIncludes 14 front panel LEDs to indicate line / battery power status, over / under voltage correction, battery charge level (4 LEDs), load percentage (4 LEDs), overload and replace battery. Also includes 1 rear panel site wiring fault indicator.
Environmental Conditions
Maximum Operating Temperature104°F (40°C)
Interfaces/Ports
USBYes
Total Number of Expansion Slots1
Management
Network ManagementSNMP Manageable
AlarmOverload
On Battery
Miscellaneous
Additional Information
  • SMART1050SLT line-interactive UPS offers battery derived sine wave AC output during power outages, voltage regulation during brownouts and overvoltages, plus network-grade AC surge suppression
  • 1050VA / 650 watt power handling capability with full-time sine wave output offers guaranteed compatibility with networking, telecom and other sensitive electronic devices
  • Large internal batteries offer runtimes of 19 minutes at half load (525VA / 325 watts) and 7 minutes at full load (1050VA / 650 watts)
  • Automatic Voltage Regulation (AVR) circuits maintain user-selectable 100, 110, 120 or 127V nominal output over an input voltage range of 91-145V
  • Includes 8 fully-protected NEMA 5-15R output receptacles arranged in a single load bank that can be powered off and back on again via software interface
  • PowerAlert UPS monitoring and unattended shutdown software enables configurable network broadcast messaging, pager & email notification, event logging and running user-defined script commands
  • Offers simultaneous monitoring of up to 3 directly-connected devices through included USB, DB9 and SNMP* interfaces (*requires optional SNMPWEBCARD), or the monitoring of any number of additional UPS systems over IP with included PowerAlert monitoring software. Free PowerAlert enterprise managment software is also available for select opportunities
  • Communications ports support messaging of UPS and line power status, including on-battery, low-battery, power restored, AC line voltage, DC battery voltage and remaining battery capacity
  • Supports timed inverter shutoff after unattended shutdown, activate self-test and UPS output power control for scheduled or immediate reboot of connected equipment
  • Supports Tripp Lite's WatchDog software application to restore unresponsive programs by systematically restarting applications, operating systems and ultimately rebooting completely locked computers by momentarily switching UPS power off and back on again (requires optional WATCH
Package Contents
  • SMART1050SLT SmartPro 120V 1.05kVA 650W Line-Interactive Sine Wave UPS
  • USB cable
  • DB9 cable
  • PowerAlert software
  • Owner's manual
Certifications & StandardsUL1778 (USA), cUL (Canada), FCC Class B (emissions), IEC 1000-4-2 Level 3 (Electrostatic Discharge), IEC 1000-4-4 Level 2 (Fast Transient / Burst), IEC 1000-4-5 Level 3 (Lightning Surge), Conforms to IEEE 587 / ANSI C62.41 specifications
Country of OriginChina
Power Description
Input Voltage120 V AC
110 V AC
100 V AC
110 V AC
120 V AC
100 V AC
Output Voltage110 V AC
100 V AC
120 V AC
120 V AC
110 V AC
100 V AC
Waveform TypeSine Wave
Technical Information
Plug/Connector TypeNEMA 5-15P
Cord Length6 ft
Receptacle TypeNEMA 5-15R
Receptacle Detail8 x NEMA 5-15R
Physical Characteristics
Weight (Approximate)43 lb
Form FactorTower
Height10.2"
Width6.8"
Depth13.2"
Battery Information
Battery Life6 Year
Battery ChemistryLead Acid
Hot SwappableYes
Backup/Run Time (Half Load)19 Minute
Backup/Run Time (Full Load)7 Minute
Typical Battery Recharge Time4 Hour
General Information
Product TypeLine-interactive UPS
Manufacturer Part NumberSMART1050SLT
Manufacturer Website Addresshttp://www.tripplite.com
ManufacturerTripp Lite by Eaton
Product NameSMART1050SLT SmartPro 120V 1.05kVA 650W Line-Interactive Sine Wave UPS
Product LineSmartPro
Brand NameTripp Lite

Tripp Lite UPS Smart 1050VA – 1000VA 650W Tower AVR 120V Pure Sine Wave USB DB9 SNMP – 1050VA/650W – 7 Minute Full Load – 8 x NEMA 5-15R 8OUT TOWER USB DB9 TEL/DSL SNMP
Protects Mission-Critical Equipment Provides fully regulated sine wave AC output for point-of-sale applications, VoIP systems and small business networks Audible alarm signals loss of utility power, low battery or overload 8 NEMA 5-15R outlets 6 ft. power cord with 120V NEMA 5-15P input 690-joule surge suppression rating Reliable Battery Backup Supports half load up to 19 min. and full load up to 7 min. Internal batteries designed for hot-swap field replacement 95% line-power efficiency rating saves money in energy costs Cold-start capability enables turn-on in battery mode during blackouts Automatic Voltage Regulation (AVR) Maintains selectable 100V, 110V or 120V nominal output over input range of 83V-145V without using battery power EMI/RFI Line Noise Filtering Removes electromagnetic and radio frequency interference that can disrupt or damage equipment’s performance LED Indicators Front-panel LEDs signal indicate line power, battery power, overload, voltage regulation and battery status Network Management Cards Compatible with Tripp Lite UPS management card options WEBCARDLX, SNMPWEBCARD and RELAYIOCARD Communication Ports USB & Serial ports enable data-saving unattended shutdown when used with Tripp Lite’s PowerAlert software, available via FREE download from www.tripplite.com/poweralert Telephone/Network Jacks Protect against power surges over telephone/DSL or network Ethernet lines

Tripp%20Lite SMART1050SLT

Features

Corrects under- and overvoltages from 83V to 145V

8 NEMA 5-15R outlets

Front-panel LEDs indicate load, power, voltage and battery statuses

Network power management and control capability

19 min. runtime at half load; 7 min. at full load

Guides & Documents

Brochure

Manual

X