Tripp Lite UPS Smart 2200VA 1600W International Rackmount AVR 230V Pure Sine Wave 2URM – 2200VA/1920W – 5 Minute Full Load – 8 x IEC 320-C13 AVR 8 C13OUT 2URM USB DB9 EXT RUN

recently added items

x

Tripp Lite UPS Smart 2200VA 1600W International Rackmount AVR 230V Pure Sine Wave 2URM – 2200VA/1920W – 5 Minute Full Load – 8 x IEC 320-C13 AVR 8 C13OUT 2URM USB DB9 EXT RUN

VPN: SMX2200XLRT2U UPC: 37332124562 SKU: GU1617

$2,092.58

UPS SMART INT 2200VA 1920W 230V AVR 8 C13OUT 2URM USB DB9 EXT RUN

SKU: 3ddc37cab141 Categories: , ,

Share:

Controls/Indicators
Status IndicatorsFront panel LCD information and configuration screen offers detailed UPS and site power status and operating data, plus configuration of voltage, operating mode, alarm function and a variety of additional options
Environmental Conditions
Thermal Dissipation47.18 W
Maximum Operating Temperature104°F (40°C)
Sound Emission (A-Weighted)45 dB(A)
Interfaces/Ports
USBYes
EPO PortYes
USB (HID Compliant) PortYes
Miscellaneous
Additional Information
    • Customized load management receptacles: 3 load banks (1 outlet per bank) that support load shedding and remote reboot on demand of locked network devices. Controllable via PowerAlert software to automatically switch off optional loads, like monitors, to increase available runtime for servers and other critical devices
    • Switches: 2 front panel-mounted push-button switches for system enable, self-test and alarm cancel functions. Rear: set of input voltage dip switches to set unit to actual input voltage. Battery charge level dip switch to adjust UPS system's battery charge rate
Package Contents
  • SmartPro SMX2200XLRT2U 2200VA Tower/Rack-mountable UPS
  • USB, Serial & EPO cabling
  • 4 post rackmount installation kit
  • Set of 3 C13/C14 power cables
  • Instruction manual
Certifications & Standards
    • CE/IEC 62040
    • FCC Class A (Emissions)
    • GOST
    • SASO
    • TUV w/GS mark
Country of OriginChina
Environmentally FriendlyYes
Environmental CertificationRoHS
Physical Characteristics
Weight (Approximate)68.75 lb
Form FactorRack/Tower
Rack Height2U
Height3.5"
Width17.5"
Depth19.5"
Management
Network ManagementSNMP Manageable
AlarmPower Failure
UPS Fault
Remote Shutdown
UPS StartUp
Overload
Low Battery
Power Description
Circuit BreakerYes
Input Voltage230 V AC
230 V AC
Output Voltage230 V AC
240 V AC
220 V AC
230 V AC
240 V AC
220 V AC
Input Current10.70 A
Surge Energy Rating350 J
Waveform TypePure Sine Wave
Output Frequency60 Hz
60 Hz
Battery Information
Battery ChemistryLead Acid
Hot SwappableYes
Backup/Run Time (Half Load)11.90 Minute
Backup/Run Time (Full Load)5 Minute
Battery CharacteristicsValve-regulated
Replaceable BatteryYes
DC System Voltage48 V DC
Typical Battery Recharge Time4.50 Hour
General Information
Product TypeLine-interactive UPS
Manufacturer Part NumberSMX2200XLRT2U
Manufacturer Website Addresshttp://www.tripplite.com
ManufacturerTripp Lite by Eaton
Product ModelSMX2200XLRT2U
Product NameSmartPro SMX2200XLRT2U 2200VA Tower/Rack-mountable UPS
Product LineSmartPro
Brand NameTripp Lite
Technical Information
Application/UsageServer
Network
Telecommunication
Emergency Power OFFYes
Protection TypeEMI
RFI
Plug/Connector TypeIEC 60320 C20
PhaseSingle Phase
Receptacle TypeIEC 60320 C13
EMI/RFI Noise FilterYes
AVRYes
Energy SavingGreater than 95% efficiency - GREEN UPS; Individually controllable load banks
Transfer Time6 ms
Receptacle Detail8 x IEC 60320 C13

Tripp Lite UPS Smart 2200VA 1600W International Rackmount AVR 230V Pure Sine Wave 2URM – 2200VA/1920W – 5 Minute Full Load – 8 x IEC 320-C13 AVR 8 C13OUT 2URM USB DB9 EXT RUN
Tripp Lite SmartPro Line Interactive UPS with enhanced LCD interface offers network-grade power protection for critical server, network and telecommunications equipment. Line Interactive Uninterruptible Power Supply (UPS) with built-in Auto-Voltage Regulation (AVR) actively corrects brownouts and overvoltages back to usable levels while maintaining a full battery charge in case of power failure. Tripp Lite’s unique configuration excels in exceptionally poor-power environments with two separate levels of voltage boost to correct both slight undervoltages and severe brownout conditions. Interactive LCD interface reports UPS operating mode, detailed UPS and site-power data, plus enables a variety of UPS setup and configuration options. Super-fast switchover from line to battery power occurs within milliseconds to maintain operation of connected equipment without interruption or reboot. 98% line-mode efficiency offers reduced heat emissions and operating costs. Network management interfaces support communications via USB, RS-232 and optional network management card option. HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Network communications ports enable detailed monitoring of equipment load levels, self-test data and utility power conditions. PowerAlert UPS monitoring software is available via free download. Switched output load banks enable scheduled and real-time remote reboot and load shedding of select outlets. Emergency Power Off (EPO) interface. LCD display panel easily rotates for viewing in rackmount or tower configurations. Audible alarm with push-button momentary alarm-cancel and silent-mode configuration options. Programmable self-test. Field-replaceable, hot-swappable battery modules.

Tripp%20Lite SMX2200XLRT2U

Features

2.2kVA / 2200VA / 1920W line interactive 2U rack/tower UPS, Sine Wave

230V output, Corrects brownouts and overvoltages from 158V to 278V

0.9 Power Factor, Interactive LCD interface

Extended runtime options up to 1600W

4 post compatible mounting accessories

98% line-mode efficiency, 2 switched load banks

USB, RS232, EPO and slot for SNMPWEBCARD option

230V C20 inlet, 8 C13 outlets

Guides & Documents

Brochure

Manual

X