Tripp Lite UPS Smart 3000VA 2880W Rackmount AVR 120V Preinstalled SNMPWEBCARD Pure Sine Wave USB DB9 2URM TAA – 2U Rack-mountable, Rack/Tower – 5 Hour Recharge – 3 Minute Stand-by – 120 V AC Input – 120 V AC Output – 8 x NEMA 5-15/20R, 1 x NEMA L5-30R – TAA Compliant 9OUT LCD USB DB9 2URM LINE-INT TA

Tripp Lite UPS Smart 3000VA 2880W Rackmount AVR 120V Preinstalled SNMPWEBCARD Pure Sine Wave USB DB9 2URM TAA – 2U Rack-mountable, Rack/Tower – 5 Hour Recharge – 3 Minute Stand-by – 120 V AC Input – 120 V AC Output – 8 x NEMA 5-15/20R, 1 x NEMA L5-30R – TAA Compliant 9OUT LCD USB DB9 2URM LINE-INT TA
Tripp Lite SmartPro Line Interactive UPS with enhanced LCD interface offers network-grade power protection for critical server, network and telecommunications equipment. Line Interactive Uninterruptible Power Supply (UPS) with built-in Auto-Voltage Regulation (AVR) actively corrects brownouts and overvoltages back to usable levels while maintaining a full battery charge in case of power failure. Tripp Lite’s unique configuration excels in exceptionally poor-power environments with two separate levels of voltage boost to correct both slight undervoltages and severe brownout conditions. Interactive LCD interface reports UPS operating mode, detailed UPS and site-power data, plus enables a variety of UPS setup and configuration options. Super-fast switchover from line to battery power occurs within milliseconds to maintain operation of connected equipment without interruption or reboot. 96% line-mode efficiency offers reduced heat emissions and operating costs. Network management interfaces support communications via USB port, DB9 serial port and pre-installed WEBCARDLX network management interface card. The Java-free HTML5-based WEBCARDLX interface enables full remote access for site power and UPS status monitoring, configuration, control and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP. HID-compliant USB interface enables integration with built-in power management and auto shutdown features of Windows and Mac OS X. Network communications ports enable detailed monitoring of equipment load levels, self-test data and utility power conditions. PowerAlert UPS monitoring and auto shutdown software is available via free download. Switched output load banks enable scheduled and real-time remote reboot and load shedding of select outlets. Emergency Power Off (EPO) interface. LCD display panel easily rotates for viewing in rackmount or tower configurations. Audible alarm with push-button momentary alarm-cancel and silent-mode configuration options. Programmable self-test. Field-replaceable, hot-swappable battery modules.

Tripp%20Lite SM3000RMXLNTAA

Features

Federal Trade Agreements Act / TAA Compliant for GSA Schedule purchases

3kVA / 3000VA / 2880W line interactive 2U rack/tower UPS; 0.96 power factor

120V nominal output during brownouts to 83V and overvoltages to 145V

Interactive LCD provides UPS status information and advanced configuration options

Expandable runtime, Hot-swap batteries, 96% efficiency, Sine wave output

USB, RS232 & EPO ports, Pre-installed SNMPWEBCARD interface

NEMA L5-30P input; 8 NEMA 5-15/20R & 1 L5-30R outlets

Guides & Documents

Brochure

Manual